764182

Vonroc GC501XX Manual

3
Zoom out
Zoom in
Previous page
1/20
Next page
EN
3
WWW.VONROC.COM
1. PRODUCT INFORMATION
Intended use
These garden cutting tools are only intended for
cutting fresh branches and twigs from shrubs,
bushes, ornamental plants, hedges and small
trees.
SPECIFICATIONS
Model No. GC501XX
Lopper (fig. A)
Application Cutting fresh wood
Safety lock No
Max. cutting diameter Ø 30mm
Total length 630mm
Blade length 70mm
Hedge shears (fig. B)
Application Cutting hedge, shrub or bush
Safety lock No
Max. cutting diameter Ø 6mm
Total length 570mm
Blade length 229mm
Secateurs (fig. C)
Application Cutting flowers and young, fresh
shoots
Safety lock Yes
Max. cutting diameter Ø 15mm
Total length 205mm
Blade length 50mm
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Lopper
2. Hedge shears
3. Secateurs
4. Handle
5. Top blade
6. Bottom blade
7. Locking knob
8. Adjusting knob
9. Nut
10. Bolt
11. Spring
12. Buffer
2. ADJUSTMENT
Lopper (Fig. A)
The lopper (1) is well adjusted by default, but the
bolt (10) may loosen slightly with use. You can
tighten or loosen the bolt (10) and nut (9) to the
desired tightness. Too loose blades can cause the
lopper to break. It should be tightened as tight
as possible, but it should still be good to use. The
required tightness can be determined by practical
tests.
Hedge shears (Fig. B)
The hedge shears (2) is well adjusted by default,
but the adjusting knob (8) may loosen slightly with
use. You can tighten or loosen the adjustment knob
(8) to the desired tightness. Too loose blades can
cause the shears to break. It should be tightened
as tight as possible, but it should still be good to
use. The required tightness can be determined by
practical tests.
Secateurs (Fig. C)
• Slide the locking knob (7) backward to unlock
the handles (4).
• Use the secateurs.
• After use push the secateurs handles (4) to-
gether and slide the locking knob (7) forward to
lock the handles (4).
3. MAINTENANCE
Cleaning
NOTICE! Risk of product damage! Never
submerge products in water while cleaning.
Do not use cleaning agents or solvents.
Wipe the device using a dry cloth.
Cutting blade
• Always wear gloves when handling or cleaning
the cutting blades.
• Clean the cutting blades and spray with a
protective oil after every use. We recommend
lubricating the cutting blade with protective oil
at regular intervals during long working periods.
• Visually inspect the condition of the cutting
blade.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc GC501XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc GC501XX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info