819185
7
Zoom out
Zoom in
Previous page
1/104
Next page
EN
7
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No.
CR504AC /
CR504AC_GREY /
CR504AC_WHITE
Compressor type Piston - oil free - low
noise
Compressor drive Direct drive
Voltage 220-240V~
Frequency 50 Hz
Input power 750W
Horsepower 1 HP
Operating mode S3 50% *
Idling speed 1450/min
IP class IP30
Protection class Class I
Air intake 128 l/min
Output (compressed air) at
7 bar 42 l/min
Output (compressed air) at
4 bar 65 l/min
Max. outlet pressure 8 bar
Cut-in pressure approx. 6 bar
Cut-out pressure approx. 8 bar
Tank capacity 6L
Cable length 2m
Weight 16 kg
Sound pressure level L
pA
= 79.7 dB(A)
K
pA
= 3 dB(A)
Sound power level L
WA
= 92.7 dB(A)
K
WA
= 3 dB(A)
* S3 = intermittent operation without the impact of
the start-up. This means that during a period of 10
minutes, the maximum operating time is 50% (e.g.
5 minutes of work and 5 minutes of rest) , under
optimal environmental conditions (max. temp
25°C). Respecting these guidelines and the prescri-
bed maintenance intervals will allow the product to
work properly over time.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Cover
2. Switch
3. Pressure switch
4. Pressure regulator
5. Quick coupler (outlet)
6. Pressure gauge (operating pressure)
7. Pressure gauge (tank pressure)
8. Safety valve
9. Handle
10. Pressure pipe
11. Drain cock
12. Air inlet
13. Air filter
14. Overload switch
15. Tank
16. Rubber feet
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Mounting the air filter (Fig. A, B)
1. Remove the transport lid and replace them with
the supplied air filter (13) before using the com-
pressor.
2. Mount the air filter (13) by screwing the air filter
(13) clockwise into the air inlet (12) as shown
on figure B.
Installing the compressor
The compressor should be installed in ventila-
ted and dry environment.
Make sure the compressor is placed on the
horizontal and stable ground.
Place the compressor on a flat surface or at a
maximum slope of 10°, in a well ventilated area,
protected against atmospheric factors and not
in explosive surroundings.
If the surface area is sloping and smooth, make
sure that the compressor will not move when in
operation.
For proper ventilation and effective cooling, it is
important that the compressor is positioned at
least 50 cm away from any wall or obstacle.
Make sure that the compressor is transported
in the right way, do not turn it upside down and
don’t lift it with hooks or ropes.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CR504AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CR504AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 11.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info