778355
7
Zoom out
Zoom in
Previous page
1/48
Next page
EN
7
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. CD508DC
Charger CD817AA
Input of charger 110-240V, 50/60Hz, 12W
Output of charger 8.4V DC 1.0A
Rechargeable battery pack 8 V Li-ion 1.3Ah
Battery charging time 1.5-2 hours
Chuck capacity 0.8 - 10 mm
Torque settings 10 + Drill mode
No load speed 0-550 /min
Weight 0.9 kg
Sound pressure level L
PA
74 dB(A), K=5dB(A)
Sound power level L
WA
85 dB(A), K=5dB(A)
Hand-arm vibration a
h,D
(Drilling into metal) 3.51m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3.
1. Machine
2. Chuck
3. Torque adjustment ring
4. Direction switch
5. On / off switch
6. Work light
7. Charging socket
8. Charger adapter
9. Charger LED indicator
10. Bit holder
11. Screwdriver bit
3. OPERATION
The battery must be charged before first use.
Charging the machine (Fig. B)
In order to charge the machine, insert the small
plug of the charger adapter (8) into the charging
socket (7) on the bottom of the machine.
Subsequently plug the mains plug connector of
the charger adapter (8) into a socket outlet. The
charger indication light (9) will show the charging
progress.
LED indicator (9) (Fig. A)
The charger adapter has 1 LED indicator (9) which
indicates the status of the charging process:
LED Charger status
Red Battery charging in progress
Green
Battery charging finished, battery fully charged
Fully charging the battery may take up to 1.5-2
hours.
After the battery is fully charged remove the
charger adapter from the outlet.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Fitting and removing drills or screwdriver bits (Fig. C)
Always remove the battery before mounting
an accessory.
The drill chuck (2) is suitable for drills and screwdriver
bits with round shaft as well as hexagonal shaft.
Hold the machine firmly with one hand.
Open the drill chuck (2) by rotating the chuck
with your other hand in clockwise direction until
it is opened far enough for the bit to slide in.
Insert the shaft of the drill or screwdriver bit.
Tighten the drill chuck again by firmly rotating
the chuck (2) counterclockwise.
Check if the bit is centered well by shortly
activating the machine´s on/off switch.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc CD508DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CD508DC in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 5.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info