764089
7
Zoom out
Zoom in
Previous page
1/52
Next page
EN
7
WWW.VONROC.COM
tool. This rotary multi tool is great for editing of
materials like wood, plastic, stone, shell aluminium,
brass and steel. Always use the proper accessories
and speed setting.
TECHNICAL SPECIFICATIONS
Model No. BG501AC
Voltage 230V - 240V
Frequency 50 Hz
Power input 150 W
Rotational speed, not loaded 0-9900 /min
Duty time S2 = 30 min
Grinding wheel dimensions Ø 75x20 mm
Spindle hole diameter Ø 10 mm
Class II
Weight
2.24 kg
Lpa (Sound pressure level)
75.8+3 dB(A)
Lwa (Acoustic power)
88.8+3 db(A)
Load factor
A load factor of S2 = 30 min (intermittent periodic
duty) means that you may operate the motor con-
tinuously at its nominal power level for no longer
than the time stipulated on the specifications label
(30 minutes ON period). If you fail to observe this
time limit the motor will overheat. During the OFF
period the motor will cool again to its starting
temperature.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
- Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
- The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. On/Off switch
2. Spark guard
3. Spark guard bracket
4. Safety guard
5. Grinding wheel
6. Polishing wheel
7. Tool rest adjustment knob
8. Tool rest
9. Mounting holes
10. Spark guard adjusting screw
11. Speed adjustment knob
12. Flexible shaft
13. Locking pin
14. Wrench
3. ASSEMBLY
The grinder must be firmly bolted to a workbench.
The length of the fixing bolts will depend on the
thickness of the workbench. If the workbench is
made of steel, it is advisable to use a wooden block
or plank between the grinder and the bench, to
insulate it and prevent vibration.
Assembly and adjustment of spark guard bracket
and spark guard (Fig. C & D)
The spark guard bracket and spark guard
should only ever be assembled/adjusted
with the grinding wheel stationary, and the
machine disconnected from the power
supply
.
Fix the spark guard bracket (3) to the grinding
wheel cover, using the screws provided (10).
Set the spark guard bracket at the correct
height. The clearance between the wheel and
the spark guard bracket should be 1 to 1.5 mm.
Next tighten the screws (10) firmly.
Fix the spark guard (2) to the spark guard
bracket (3).
Position the spark guard to give maximum
protection when working.
Always wear safety glasses.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc BG501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc BG501AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info