778560
8
Zoom out
Zoom in
Previous page
1/76
Next page
8
EN
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. AG502AC
Mains voltage 220-240V~
Mains frequency 50 Hz
Power input 650 W
No-load speed 12.000/min
Grinding disc
Diameter:
Bore:
125 mm
22.2 mm
Spindle thread M14
Weight 1.69 kg
Noise and vibration
Sound pressure level L
PA
86 dB(A), K=3dB(A)
Acoustic power level L
WA
97 dB(A), K=3dB(A)
Vibration 2.48 m/s
2
, K=1.5 m/s
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. On/off switch
2. Spindle lock button
3. Spindle
4. Guard
5. Main grip
6. Auxiliary grip
3. OPERATION
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Mounting and removing the guard & grinding disc
(fig. B)
Do not use the machine without the guard.
Mounting
Place the machine on a table with the spindle
(3) facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
If necessary, remove the grinding disc (9).
Remove the flange (10).
Mount the guard (4). Secure the guard (4) by
tightening the screw (11) and the nut (12).
Mount the flange (10).
If necessary, mount the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Removing
Place the machine on a table with the spindle
(3) facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
If necessary, remove the grinding disc (9).
Remove the flange (10).
Remove the guard (4) by loosening the screw
(11) and the nut (12).
Mount the flange (10).
If necessary, mount the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Mounting and removing the auxiliary grip (fig.C)
Mounting
Tighten the auxiliary grip (6) into one of the
mounting holes (13).
Removing
Loosen the auxiliary grip (6) from the mounting
hole (13).
Switching on and off (fig. A)
To switch on the machine in continuous mode,
slide the on/off switch (1) in the direction of the
grinding disc.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc AG502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc AG502AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 6.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info