||
MAINTENANCE AND SERVICE
670
2. Carefully prize the plastic cover at the con-
nector's lock lug so that the lock lug relea-
ses.
3. Unplug the connector from the bulb.
4. Replace the bulb.
5. Fit the bulb in the socket and turn down-
ward.
Related information
•
Exterior lamp positions (p. 668)
•
Removing the plastic cover for bulb
replacement (p. 667)
•
Removing the headlamp's oval cover
(p. 667)
•
Bulb specifications (p. 672)
Replacing daytime running light
bulb/position lamp bulb, front
The daytime running light bulb/position lamp
bulb in the halogen headlamp can be
replaced without assistance from a work-
shop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
Before the bulb can be replaced, the oval
cover on the headlamp must be removed.
NOTE
The bulb for the daytime running light/
position lamp is easier to access if the
main beam bulb is detached. The main
beam bulb is fitted diagonally above the
daytime running light bulb/position lamp
bulb. Detach the main beam bulb by rotat-
ing its bulb holder upwards and then pull-
ing straight out.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Pull the bulb holder for the daytime run-
ning light bulb/position lamp bulb straight
out.
2. Detach the bulb by pulling it straight out.
3. Replace the bulb.
4. Fit the bulb holder into the socket and
press it into place.
5. If the main beam bulb's bulb holder has
been removed, fit it into the socket and
screw in.
Related information
•
Exterior lamp positions (p. 668)
•
Removing the plastic cover for bulb
replacement (p. 667)
•
Removing the headlamp's oval cover
(p. 667)
