MAINTENANCE AND SERVICE
}}
667
Removing the plastic cover for
bulb replacement
The bulb in the halogen headlamp can be
replaced without the help of a workshop, but
the plastic cover over the headlamp must be
removed before a bulb can be replaced.
Lift off the rubber strip by pressing it
inward in the engine compartment.
Press down the pins into the plastic cov-
er's four clips using a screwdriver or simi-
lar and lift away the cover.
Refit the cover in reverse order.
Related information
•
Bulb replacement (p. 666)
•
Replacing the dipped beam bulb (p. 669)
•
Replacing the main beam lamp (p. 669)
•
Replacing daytime running light bulb/posi-
tion lamp bulb, front (p. 670)
•
Replacing the front direction indicator
bulb (p. 671)
•
Bulb specifications (p. 672)
Removing the headlamp's oval
cover
Most of the headlamp's bulbs become acces-
sible when the oval cover has been removed.
Before the oval cover can be removed, the
plastic cover over the headlamp must first be
lifted off.
Left-hand headlamp.
1. Unscrew the cover's four screws using a
tool for Torx, dimension T20 (1). Do not
unscrew fully, 34 turns is sufficient.
Slide the cover to one side.
3. Remove the cover.
Reinstall the cover in reverse order.
Related information
•
Bulb replacement (p. 666)
•
Replacing the dipped beam bulb (p. 669)
