The door panels behind the second row of
seats can be equipped with headphone con-
nectors for passengers in the second and
third row of seats. Several people can listen
to different sound sources, such as CDs or
the radio at the same time without disturbing
each other.
Two sets of headphones can be plugged into
each connector.
1. With the audio system switched on, use
the SEL button to select a sound source.
2. Press the arrow keys briefly to change CD
tracks or switch between preset stations.
3. Hold down the arrow keys to fast for-
ward/reverse, or search for the previous/
next strong radio station.
4. Hold down the SEL button to turn off the
sound.
NOTE
For the best sound reproduction, we rec-
ommend headphones with impedance
between 16 – 32 ohm. The sensitivity of
these should be equal to or greater than
102 dB. The headphone connections are
intended for 3.5 mm contacts and are
located under the lower edge of the
socket.
All headphones are automatically turned off
when the ignition is switched off. They must
be manually restarted when the ignition is
switched on again.
Headphones – limitations
•
The headphones will only work when the
ignition key is in position I or higher.
•
If a set of headphones is connected to
the same source that is being sent
through the speakers, the headphone
controls cannot be used to change track
or station. This is to prevent the driver
from being distracted by an unexpected
change in music.
•
If the driver selects the same sound
source as someone listening to this
source through headphones, the driver
takes control of the sound source.
•
Only one disc in the optional CD changer,
and one track on the CD can be played at
a time.
•
Headphone users can choose from
among the preset radio stations (AM,
FM1, FM2) previously set by the driver.
•
If FM is played in the speakers, AM is not
available and vice versa.
