||
02 Safety
02
28
matically after driving for approximately
30 seconds or after pressing the indicator
stalk OK button (p. 110).
•
Provides a warning if one of the rear seat-
belts is unfastened during travel. This
warning takes the form of a message in
the combined instrument panel along with
the audio/visual signal. The warning stops
when the seatbelt is re-fastened, or it can
also be acknowledged manually by
pressing the OK button.
The message in the combined instrument
panel showing which seatbelts are in use is
always shown. Press the OK button to see
stored messages.
Certain markets
An acoustic signal and indicator lamp remind
the driver and front seat passenger to use a
seatbelt if either of them is not wearing one.
At low speed, the audible reminder will sound
for the first 6 seconds.
Seatbelt tensioner
All the seatbelts (p. 25) are equipped with belt
tensioners. A mechanism in the seatbelt ten-
sioner tightens the seatbelt in the event of a
sufficiently violent collision. The seatbelt then
provides more effective restraint for the occu-
pants.
WARNING
Never insert the tongue of the passenger's
seatbelt into the buckle on the driver's
side. Always insert the tongue of the seat-
belt into the buckle on the correct side. Do
not make any damages on seatbelts nor
insert any foreign objects into a buckle.
The seatbelts and buckles would then
possibly not function as intended in the
event of a collision. There is a risk of
serous injury.
Safety - warning symbol
The warning symbol is shown if a fault is
detected during fault tracing or if a system
has been activated. Where required, the
warning symbol is shown together with a
message in the combined instrument panel
(p. 63) information display.
Warning triangle and warning symbol for the air-
bag system (p. 29) in the analogue combined
instrument panel.
