484452

Volvo XC70 - 2006 Manual

201
Zoom out
Zoom in
Previous page
1/211
Next page
193
NOTE - Canadian residents:
During programming, your hand-held transmitter may automatically stop
transmitting. To successfully train HomeLink®, continue to hold the
HomeLink® button. At the same time, repeatedly press and hold your
hand-held transmitter’s button at two-second intervals until HomeLink®
has learned your transmitter’s code. The HomeLink® indicator light
will flash first slowly, and then rapidly to indicate that the button has
been successfully programmed.
Determining if your garage door uses a rolling code
Determine, in one of the following ways, if your garage door uses a
rolling code system and is manufactured after 1996:
• Refer to the garage door opener owners manual for verification.
• If your hand-held transmitter appears to program the HomeLink®
Universal Transceiver but the programmed button does not activate
the garage door, your garage door opener may have a rolling code.
• Press the programmed HomeLink® button. If the garage door opener
has the rolling code feature, the HomeLink® indicator light flashes
rapidly and then glows steadily after approximately 2 seconds.
To train a rolling code garage door opener, follow these instructions
after programming the desired transceiver button according to “Program-
ming the transceiver.” The help of a second person may make training
easier.
1. Locate the training button on the garage door opener motor head unit.
The location and color of the training button may vary. If you
encounter difficulty, refer to the garage door opener owners manual
or call toll-free 1-800-355-3515 (Internet: www.HomeLink.com).
2. Press the training button on the garage door opener motor head unit
until the training light comes on.
3. Press and release the programmed HomeLink® button. Press and
release the programmed HomeLink® button a second time to com-
plete the training process.
Some garage door openers may require you to do this procedure a
third time to complete the training.
The programmed button on your HomeLink® Universal Transceiver
should now operate your garage door opener. The original hand-held
transmitter can also be used, as desired, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the
same way. In the event of any problems in programming the
HomeLink® Universal Transceiver, call toll-free 1-800-355-3515
(Internet: www.HomeLink.com).
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used
in place of your hand-held transmitters.
To operate, the key must be turned to the “accessory” position (II) or
the engine must be running. Press the programmed HomeLink® button
to activate the garage door, driveway gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any
time.
Erasing programmed buttons
Individual buttons cannot be erased. To erase all three programmed
buttons:
1. Turn the ignition key to the accessory position (II).
2. Hold down the two outside buttons on the HomeLink® Universal
Transceiver for about 20 seconds, until HomeLink®s indicator light
begins to flash.
3. Release both buttons.
The HomeLink® buttons can be reprogrammed using the procedures
described on the previous page.
(HomeLink® information continues on the next page)
HomeLink® Universal Transceiver (option)
… 201 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volvo XC70 - 2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volvo XC70 - 2006 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Volvo XC70 - 2006

Volvo XC70 - 2006 User Manual - German - 250 pages

Volvo XC70 - 2006 User Manual - Dutch - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info