484454
130
Zoom out
Zoom in
Previous page
1/226
Next page
129
Changing wheels
7700245d
7700316m
7700244d
Jack for cars with all-wheel drive
(AWD and XC)
The jack should be located so
· Hold the jack against the pin in the jacking
point as illustrated and wind down the jack
foot so that it is pressed flat against the
ground.
· Check again that the jack is mounted
correctly as in the illustration and that
the foot is positioned vertically under
the mounting.
· Lift the car so that the wheel is free.
· Remove the wheel studs and lift off the
wheel.
NOTE! See page 127 for information on the
spare wheel.
Fitting
· Clean the contract surfaces on the wheel and
hub.
· Mount the wheel and tighten the wheel bolts.
· Lower the car so that the wheels cannot
rotate. Tighten the wheel studs crosswise and
in torque steps. Tightening torque: 140 Nm
(14.0 kpm). It is important that they are
tightened to the correct torque. Tightening
should be checked with a torque wrench.
· Fit the hub cap.
· Screw the jack together before returning it
to the cargo compartment.
· Ensure that the jack and tool kit are properly
secured and do not rattle.
WARNING!
· Never crawl under the car when it is
raised on a jack!
· The car and the jack should be on a
solid horizontal surface.
· The car's original jack should be used
for wheel changing. All other work on
the car should be carried out using
workshop jacks and axle stands under
the part of the car which is raised.
· Apply the parking brake, put the car
in 1st gear or reverse on manual
gearbox and position P on the
automatic gearbox.
· Put chocks in front of and behind the
wheels to remain on the ground. Use
large wooden blocks or large stones.
· The jack screw should be kept well
lubricated.
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volvo XC70 - 2005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volvo XC70 - 2005 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Volvo XC70 - 2005

Volvo XC70 - 2005 User Manual - German - 226 pages

Volvo XC70 - 2005 User Manual - Dutch - 226 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info