Manual Volvo XC60 - 2011 (page 107 of 360) (English)

484460

107

Zoom out

Zoom in

1/360

03 Your driving environment

HomeLink® Wireless Control System*

* Option/accessory, for more information, see Introduction.

107

NOTE

Some devices may require you to replace

this Programming Step 2 with procedures

noted in the “Gate Operator / Canadian Pro-

gramming” section. If the HomeLink indica-

tor light does not change to a rapidly blink-

ing light after performing these steps, con-

tact HomeLink at www.homelink.com.

Firmly press, hold for five seconds and

release the programmed HomeLink but-

ton up to two separate times to activate the

door. If the door does not activate, press

and hold the just-trained HomeLink button

and observe the indicator light.

•

If the indicator light stays on con-

stantly, programming is complete

and your device should activate when

the HomeLink button is pressed and

released.

•

If the indicator light blinks rapidly for

two seconds and then turns to a con-

stant light continue with “Program-

ming” steps 4-6 to complete the pro-

gramming of a rolling code equipped

device (most commonly a garage door

opener).

4. At the garage door opener receiver (motor-

head unit) in the garage, locate the “learn”

or “smart” button. This can usually be

found where the hanging antenna wire is

attached to the motor-head unit.

5. Firmly press and release the “learn” or

“smart” button. (The name and color of the

button may vary by manufacturer.) There

are 30 seconds to initiate step 6.

6. Return to the vehicle and firmly press, hold

for two seconds and release the pro-

grammed HomeLink button. Repeat the

“press/hold/release” sequence a second

time, and, depending on the brand of the

garage door opener (or other rolling code

equipped device), repeat this sequence a

third time to complete the programming

process.

HomeLink should now activate your rolling

code equipped device.

Gate Operator/Canadian Programming

Canadian radio-frequency laws require trans-

mitter signals to “time-out” (or quit) after sev-

eral seconds of transmission – which may not

be long enough for HomeLink to pick up the

signal during programming. Similar to this

Canadian law, some U.S. gate operators are

designed to “time-out” in the same manner.

If you live in Canada or you are having difficul-

ties programming a gate operator or garage

door opener by using the “Programming” pro-

cedures, replace “Programming HomeLink”

step 2 with the following:

•

Continue to press and hold the HomeLink

button while you press and release -

every two seconds (“cycle”) your hand-

held transmitter until the HomeLink indica-

tor light changes from a slow to a rapidly

blinking light. Now you may release both

the HomeLink and hand-held transmitter

buttons.

Proceed with “Programming” step 3 to com-

plete.

Using HomeLink

To operate, simply press and release the pro-

grammed HomeLink button. Activation will

now occur for the trained device (i.e., garage

door opener, gate operator, security system,

entry door lock, home/office lighting, etc.). For

convenience, the hand-held transmitter of the

device may also be used at any time. In the

event that there are still programming difficul-

ties or questions, contact HomeLink at:

www.homelink.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Volvo XC60 - 2011 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Volvo XC60 - 2011

Volvo XC60 - 2011 User Manual - German - 424 pages

Volvo XC60 - 2011 User Manual - Dutch - 392 pages

Volvo XC60 - 2011 User Manual - French - 336 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Volvo XC60 - 2011 Manual

Product: