||
03 Instruments and controls
03
74
Manual lowering of the outer head
restraints, rear seat
Pull the locking handle closest to the head
restraint to fold the head restraint forward.
The head restraint is moved back manually
until a "click" can be heard.
WARNING
The head restraints must be in locked
position after being raised.
Lowering the rear seat backrest
IMPORTANT
There must be no objects on the rear seat
when the backrest is to be folded down.
The seat belts must not be connected
either. Otherwise there is a risk of damag-
ing the rear seat upholstery.
The triple-section backrest can be folded in
different ways.
NOTE
The front seats may need to be pushed
forwards, and/or the backrests adjusted
upwards, in order that the rear backrests
can be folded forward fully.
•
The left-hand section can be folded sepa-
rately.
•
The centre section can be folded sepa-
rately.
•
The right-hand section can only be folded
together with the centre section.
•
If the entire backrest is to be folded then
the different sections should be folded
separately.
If the centre backrest is being lowered -
release and adjust the head restraint for
the centre backrest, see the earlier sec-
tion "Head restraint, centre seat, rear".
The outer head restraints are lowered
automatically when the outer backrests
are lowered. Pull up the backrest's lock-
ing handle
while folding the backrest
forward at the same time. A red indicator
on the lock catch
shows that the
backrest is no longer locked in place.
Raising takes place in reverse order.
NOTE
When the backrest has been raised, the
red indicator should no longer be showing.
If it is still showing then the backrest is not
locked in place.
