MAINTENANCE AND SERVICE
376
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens and
gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not squeeze the bulb
too hard with the pliers. Otherwise, the bulb
glass could then break.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
Related information
•
Lamps - specifications (p. 376)
Lamps - specifications
The specifications apply to bulbs. For replace-
ment of LED lamps and xenon lamps, please
contact a workshop.
Lighting
W
A
Type
Dipped beam, halo-
gen
55 H7 LL
Main beam, halogen 65 H9
Extra main beam,
ABL
65 H9
Front direction indi-
cators
24 PY24W
Courtesy lighting
front
3 T10 Socket
W2.1x9.5d
Glovebox lighting 5 Socket SV8.5
Length 43 mm
Vanity mirror light-
ing
1.2 T5 Socket
W2x4.6d
Cargo area lighting 5 Socket SV8.5
Length 43 mm
Number plate light-
ing
5 C5W LL
Direction indicators,
rear
21 PY21W LL