||
INSTRUMENTS AND CONTROLS
88
The triple-section backrest can be folded in dif-
ferent ways.
NOTE
The front seats may need to be pushed for-
wards, and/or the backrests adjusted
upwards, in order that the rear backrests can
be fully folded forward.
•
The left-hand section can be folded sepa-
rately.
•
The centre section can be folded separately.
•
The right-hand section can only be folded
together with the centre section.
If the centre backrest is being lowered -
release and adjust the head restraint for the
centre backrest, see the earlier section
"Head restraint, centre seat, rear".
If the centre backrest is being lowered -
release and adjust the head restraint for the
centre backrest, see the earlier section
"Head restraint, centre seat, rear".
The outer head restraints are lowered auto-
matically when the outer backrests are low-
ered. Pull up the backrest's locking handle
while folding the backrest forward at the
same time. A red indicator on the lock catch
shows that the backrest is no longer
locked in place.
NOTE
When the backrests have been lowered the
head restraints must be moved forward
slightly so as not to make contact with the
seat cushion.
Raising takes place in reverse order.
NOTE
When the backrest has been raised, the red
indicator should no longer be showing. If it is
still showing then the backrest is not locked
in place.
