SAFETY
48
Seatbelts
Heavy braking can have serious consequen-
ces if the seatbelts are not used.
It is important that the seatbelt lies against the
body so it can provide good protection. Do not
lean the backrest too far back. The seatbelt is
designed to protect in a normal seating posi-
tion.
WARNING
Remember not to clip or hook the seatbelt
to hooks or other interior fittings, as this
prevents the belt from tightening properly.
WARNING
The seatbelts and airbags interact. If a
seatbelt is not used or is used incorrectly,
this may diminish the protection provided
by the airbag in the event of a collision.
WARNING
Never modify or repair the seatbelts your-
self. Volvo recommends that an authorised
Volvo workshop should be contacted.
If the seatbelt has been subjected to a
major load, such as in conjunction with a
collision, the entire seatbelt must be
replaced. Some of the seatbelt's protective
properties may have been lost even if the
seatbelt does not appear damaged. The
seatbelt must also be replaced if it shows
signs of wear or damage. The new seatbelt
must be type-approved and designed for
installation at the same location as the
replaced seatbelt.
Related information
•
Safety (p. 44)
•
Seatbelt tensioner (p. 50)
•
Putting on and taking off seatbelts
(p. 48)
•
Door and seatbelt reminder (p. 51)
Putting on and taking off seatbelts
Make sure that all passengers have fastened
their seatbelts before starting to drive.
Putting on seatbelts
1. Pull out the seatbelt slowly and make sure
it is not twisted or damaged.
NOTE
The seatbelt is equipped with an inertia
reel that is locked in the following situa-
tions:
•
if the belt is extended too quickly.
•
during braking and acceleration.
•
if the car leans heavily.
•
when driving in bends.
