10 Maintenance and service
10
}}
347
WARNING
Never fill above the MAX mark. The level
should never be above MAX or below MIN
as this could lead to engine damage.
WARNING
Do not spill oil onto the hot exhaust mani-
fold due to the risk of fire.
Engine with electronic oil level sensor,
4-cyl. 2.0 l
6
Filler pipe.
7
You do not need to take action with respect
to the engine oil level before a message is
shown in the display, see the illustration
below.
Message and graph in the display. The left-hand
display shows the digital combined instrument
panel and the right-hand the analogue.
Message
Engine oil level
The oil level is checked using the electronic
oil level gauge with the thumbwheel when the
engine is switched off, see Menu navigation -
combined instrument panel (p. 100).
WARNING
If the message Oil service required is
shown, visit a workshop. The oil level may
be too high.
IMPORTANT
If notified of low oil level, only fill with the
volume specified, for example, 0.5 litres.
NOTE
The system cannot directly detect changes
when the oil is filled or drained. The car
must have been driven approx. 30 km and
have been stationary for 2 hours with the
engine switched off and on level ground
before oil level indication is correct.
WARNING
Do not spill oil onto the hot exhaust mani-
fold due to the risk of fire.
Measuring the oil level, 4-cyl. 2.0 l
If the oil level needs to be checked then it
should be carried out in accordance with the
sequence below.
1. Activate key position II; see Key positions
- functions at different levels (p. 70).
6
Does not apply to the B4204T7 engine - see instead the earlier heading "Engine with oil dipstick".
7
Engines with electronic oil level sensor do not have a dipstick.
