||
MAINTENANCE AND SERVICE
356
Insert (approx. 20 mm) a blunt, knife-like
object, e.g. a table knife, at the triangle.
Carefully prise until the lug releases.
IMPORTANT
Take care not to damage any parts.
Turn the bulb holder anticlockwise.
Pull out the bulb holder.
3. Push in the lamp and turn it anticlockwise.
4. Replace the bulb and put back the parts in
reverse order.
Related information
•Lamps - specifications (p. 356)
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
1. Insert a screwdriver under the lamp lens and
gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp lens.
3. Using needle-nose pliers, pull the bulb
straight out to the side. Do not squeeze the
bulb too hard with the pliers. Otherwise, the
bulb glass could then break.
4. Replace the bulb and put back the parts in
reverse order.
Related information
•Lamps - specifications (p. 356)
Lamps - specifications
The specifications apply to bulbs. For replace-
ment of LED lamps, please contact a workshop.
Lighting WAType
Dipped beamB55 H7 LL
Main beamB65 H9
Front direction indica-
tors
21 HY21W
Position lamps, frontB5 W5W LL
Daytime running lights,
front bumperC
19 PW19W
Side direction indica-
tors, door mirrorsC
5 WY5W LL
Direction indicators,
rear
21 PY21W LL
Brake light 21 P21W LL
Reversing lamp 21 P21W LL
Rear fog lamp 21 H21W LL
Vanity mirror lighting 1.2 T5 Socket
W2x4.6d
AWatt
BCars with halogen headlights
CCertain variants