||
WHEELS AND TYRES
* Option/accessory.
326
3. Lower the car so that the wheels cannot
rotate.
4. Tighten the wheel nuts crosswise. It is impor-
tant that the wheel nuts are tightened with
the correct tightening torque. Check the tor-
que with a torque wrench.
5. Refit the plastic caps on the wheel nuts.
6.
Refit any full wheel covers.
NOTE
The wheel cover outlet for the valve must be
positioned over the valve on the wheel rim
during fitting.
Returning the tools to their places
After using the tools they must be returned to
their correct places in the foam block.
If the spare wheel has been used then the punc-
tured wheel can be placed in the plastic bag con-
tained in the package with the gloves. Return the
foam block to its place and press the retaining
screw down into the floor of the storage compart-
ment.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
NOTE
•After a tyre has been inflated, always refit
the dust cap in order to avoid damage to
the valve from gravel, dirt, etc.
•Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
When changing to another tyre
dimension
Contact an authorised Volvo workshop to update
the software each time the tyre dimension is
changed. A software download may be necessary
both when changing to larger and smaller dimen-
sions, and also when switching between summer
and winter wheels.
Related information
•Changing wheels - taking out the spare
wheel* (p. 323)
•Changing wheels - removing wheels (p. 323)
•Spare wheel* (p. 322)
•Warning triangle (p. 327)
•Wheel nuts (p. 321)