03 Audio and media
03
}}
* Option/accessory, for more information, see Introduction.
35
•
Voice control volume - The volume of
the voice recognition (p. 63) system
voice.
•
Ringtone volume - The volume of the
car's ring signal for a connected mobile
phone (p. 57).
•
Park assist volume - The volume for
parking assistance*.
•
Cross Traffic Alert-vol. - The volume for
the CTA system*.
•
Volume compensation - Audio compen-
sation for excessive noise in the passen-
ger compartment (p. 36).
•
Reset audio settings - Restores the
audio settings to factory settings.
Related information
•
Audio and media - operating the system
(p. 28)
Audio and media - advanced audio
settings
Adapt the audio settings for radio and media
according to your wishes.
All the advanced audio settings are accessed
by pressing SOUND in order to access the
audio settings menu. Turn TUNE to scroll to
Premium sound and press OK/MENU.
Sound stage
The sound experience can be optimised for
different parts of the car. The sound profile
can be set for
Driver seat, Rear seats or
Whole car.
1.
Turn TUNE to scroll to
Sound stage and
press OK/MENU.
2. Select sound profile by turning TUNE and
confirm with OK/MENU.
Surround
The surround system can be set to the On/Off
position. When On is selected, the system
selects the setting for optimal sound repro-
duction. Normally DPL II and
are then
shown in the screen. If the recording is made
with Dolby Digital technology then playback
will take place with this setting,
is
then shown in the screen. When Off is
selected, 3-channel stereo is available.
1.
Turn TUNE to scroll to
Surround and
press OK/MENU.
2. Surround can be set in On/Off mode by
pressing OK/MENU
The surround level can be set separately if On
is selected.
1. Turn TUNE to scroll to the level setting
and confirm with OK/MENU.
2. Select surround level by turning TUNE
and confirm with OK/MENU.
Bass speaker
The volume level for the subwoofer can be
set separately.
1.
Turn TUNE to scroll to
Subwoofer and
press OK/MENU.
2. Select volume level by turning TUNE and
confirm with OK/MENU.
Centre speaker
The volume level for the centre speaker can
be set separately. If surround is in On mode
then
DPL II centre level is set, otherwise 3
channel centre level is set.
1.
Turn TUNE to scroll to
Centre and press
OK/MENU.
2. Select volume level by turning TUNE and
confirm with OK/MENU.
Related information
•
Audio and media - operating the system
(p. 28)
•
Setting the equaliser (p. 36)