||
MAINTENANCE AND SERVICE
* Option/accessory.
654
wipers are not on. Service mode is activated/
deactivated via the function view in the centre
display:
Press the
Wiper Service
Position button. The light
indicator in the button illumi-
nates when service mode is
activated. When activated,
the wipers move to the serv-
ice position. To deactivate the
service mode, press Wiper Service Position
again. The light indicator in the button extin-
guishes when service mode is deactivated.
The wiper blades also exit the service position
if:
•
Windscreen wiping is activated.
•
Windscreen washing is activated.
•
The rain sensor is activated.
•
The car is driven away.
IMPORTANT
If the wiper arms in service position have
been folded up from the windscreen, they
must be folded back down onto the wind-
screen before the activation of wiping,
washing or the rain sensor, as well as
before driving. This is to avoid scraping the
paint on the bonnet.
Related information
•
Using the rain sensor (p. 180)
•
Using windscreen and headlamp washers
(p. 182)
•
Using the rain sensor's memory function
(p. 181)
•
Filling washer fluid (p. 654)
•
Replacing windscreen wiper blades
(p. 652)
•
Using windscreen wipers (p. 179)
•
Wiper blades and washer fluid (p. 179)
Filling washer fluid
Washer fluid is used for cleaning the head-
lamps and windscreen. Washer fluid with
antifreeze must be used when the tempera-
ture is under the freezing point.
Washer fluid is filled into the reservoir with the
blue cap. The reservoir is used for both wind-
screen washer and headlamp washers*
NOTE
When approx. 1 litre (1 qt) of washer fluid
remains in the reservoir, the message
Washer fluid Level low, refill is shown in
the driver display, together with the
symbol.
Prescribed grade: Washer fluid recom-
mended by Volvo – with frost protection dur-
