484417
196
Zoom out
Zoom in
Previous page
1/234
Next page
06 Maintenance and specifications
195
Wheels and tyres
06
3. Place chocks in front of and behind the
wheels which will remain on the ground.
Use heavy wooden blocks or large
stones.
4. (For cars with steel rims.) Prise off the
wheel cover with the end of the wheel
wrench, or pull it off by hand.
5. Loosen the wheel nuts ½–1 turn anti-
clockwise with the wheel wrench.
6. There are two jacking points on each
side of the car. Crank the foot of the
jack down so it is pressed squarely on
the ground. Check that the jack sits in
the anchorage as illustrated and that the
foot is positioned vertically under the
anchorage.
7. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
Installation
1. Clean the contact surfaces on the wheel
and hub.
2. Put on the wheel. Screw in the wheel
bolts.
3. Lower the car so that the wheels cannot
rotate.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tight-
ened properly. Tighten to 140 Nm.
Check the torque with a torque wrench.
5. Fit on the wheel cover (for cars with
steel rims).
7700603s
NOTE
The hubcap outlet for the valve must be lo-
cated over the valve on the rim when fitted.
7700605s
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Park the car so that passengers have the
car - or preferably a crash barrier - between
them and the road.
196


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volvo S80 - 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volvo S80 - 2007 in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Volvo S80 - 2007

Volvo S80 - 2007 User Manual - German - 234 pages

Volvo S80 - 2007 User Manual - Dutch - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info