7.
ACHTUNG! Sicherstellen, dass das
Kugelteil fest sitzt: Dieses dazu hoch-,
herunter- und zurückbewegen. Wenn das
Kugelteil nicht korrekt sitzt, muss es
abgenommen und erneut wie zuvor
beschrieben montiert werden.
3. Drehen Sie den Verriegelungsknopf
vollständig bis zum Anschlag weiter. Halten Sie
ihn indieser StellungundziehenSiegleichzeitig
das Kugelteil nach hinten und oben heraus.
8.
ACHTUNG! Das Sicherheitskabel des
Anhängers muss an der Befestigung in der
Anhängerzugvorrichtung gesichert werden.
4. Setzen Sie den Schutzstopfen ein.2. Drücken Sie den Verriegelungsknopf ein
und drehen Sie ihn gegen den Uhrzei-
gersinn, bis ein Klicken zu hören ist.
Kugelkopfdemontage
1. Stecken Sie den Schlüssel ein und
drehen Sie ihn im Uhrzeigersinn, um das
Schloss zu entriegeln.