Anti-theft code
The radio features anti-theft circuitry. If the set is removed from the vehicle or if the battery power is
disconnected, a special code must be entered to enable operation of the set. Refer to the radio code card
supplied with your vehicle or ask your retailer for the correct code .
When the car is parked with the ignition key removed, the anti-theft LED will flash
To enter the code
After installation or when the set has been disconnected from power, the set displays "COdE" when it is
switched on.
Enter the 4-digit code using the preset buttons. If the correct code is entered the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.
Incorrect code
If an incorrect code has been entered "EEEE" is displayed. Enter the correct code.
After three unsuccessful coding attempts the set will lock and remain locked for two hours.
"OFF" is displayed.
During this waiting period:
● the battery must be connected
● the ignition key must be turned to position I
● the unit must be turned on
Make sure the headlights are turned off to help prevent battery drain.
Enter the code again once this time has elapsed.
