701479
99
Zoom out
Zoom in
Previous page
1/201
Next page
- 98 -
switched off but the ventilator remains switched on for another 30 seconds; then the appliance will be in
standby mode. The appliance will switch on again if the room cools down to 2 °C below the set
temperature.
Note: To turn the thermostat off, press the function button to select heating on low or full power. The
unit will now work continuously. You no longer see the temperature on the display. If the appliance has been
running continuously for 12 hours, it will switch off automatically, cool down and return to standby.
DAY AND TIME SETTING
1. Press the set button SETonce; the display will show the hour. Use the plus and minus buttons
/ to set the hour (from 0 to 23).
2. Press the set button SET” again to set the minute. Use the plus and minus buttons / to set the
number of minute (from 00 to 59).
3. Press the set button “SET” again to set the day; use the plus and minus buttons / to set the day:
Monday = d1, Tuesday = d2, etc.
4. Finally, press the button “OK” to confirm the settings. The display will show the previous setting. Press the
set button “SET” to check the day and time.
WEEKLY PROGRAMME SETTING
1. Before set a weekly programme, you first need to set the date and time. Switch the unit on by pressing
the on/off button .
2. Press the program button P; icon “P” appears on the display.
3. Press button DAY; icon “d1” appears on the display. Press button DAY again to set the day: d1 =
Monday, d2 = Tuesday, etc.
4. Press button EDIT; icon P1 (programme 1) on the display. A maximum of six programs can be set per
day: P1 to P6. Press “EDIT” again to go to P2, and so on.
5. Press button “TIME/ON to set the start time; the display will show “00”. Press “TIME/ON” to increase the
start time from 00 to 24.
6. Press button “TIME/OFFto set the stop time; the display will show the start time (the start time you just
set). Press “TIME/OFF” to increase the stop time. The stop time must always be later than the start time.
If both times are the same, the unit will switch to standby mode.
7. Press the plus and minus buttons / to set the required temperature.
8. Finally, press button “OKto confirm the setting.
9. Repeat steps 3 to 8 to set a weekly program of start and stop times, for 7 days and up to 6 programs per
day.
10. Follow the steps described above to change a setting. This will overwrite the previous values. Press the
button “OK” to confirm the setting.
11. To turn the weekly programme off, press the button “P” again. The icon “P” disappears from the display
and you leave the weekly programme. The unit returns to its previous settings.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltomat Heating BH-117327.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltomat Heating BH-117327.3 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info