799124
65
Zoom out
Zoom in
Previous page
1/80
Next page
8. Bediening
a) Algemene bedieningsstappen
1 Druk 3 seconden lang op de terug/aan-/uit-knop om het opstartscherm weer te geven. Na
het opstarten wordt het warmtebeeld op het scherm weergegeven.
2 Richt op een gebied of object met de warmtebeeldpunten en controleer het warmtebeeld.
De relatieve temperatuur wordt weergegeven van warm naar koud door de kleurentabel
(komt overeen met licht naar donker). De infrarood temperatuurmeting (weergegeven boven
het warmtebeeld) geeft de temperatuur aan van het doelmeetpunt gericht op de kruiscursor
op het weergavescherm.
3 Druk op de knop Omhoog en Omlaag om de fusieverhouding van infrarood en zichtbaar
licht aan te passen.
4 Druk op de knop Schakelaar-knop om een warmtebeeld te maken, dat wordt weergegeven
omgeven door witte vakken.
5 Druk op de OK-knop om het vastgelegde warmtebeeld op te slaan. Het warmtebeeld wordt
opgeslagen in het interne geheugen en kan worden bekeken door de camera met de USB-
kabel op een computer aan te sluiten. Druk op de Terug-knop om door te gaan met het
scannen van het doelgebied of object.
6 Druk tijdens het scannen van een gebied of object op de OK-knop om de menu-opties te
openen, waar verschillende instellingen en informatie kunnen worden geopend. Druk op de
terug-/aan-/uit-knop om het menu te sluiten.
b) Stroomvoorziening
De warmtebeeldcamera wordt gevoed door drie AAA-alkalinebatterijen. Om de thermische
camera aan-/uit te zetten, drukt u ongeveer 3 seconden lang op de terug-/aan-/uit-knop.
Het batterijstatussymbool wordt in de rechterbovenhoek weergegeven. Als het
batterijstatussymbool rood is, is de batterij bijna leeg en moet deze worden vervangen.
Het gebruik van een batterij met onvoldoende vermogen kan leiden tot onnauwkeurige
temperatuurmetingen.
Als de camera 10 minuten niet wordt gebruikt, schakelt de APO-automatische
uitschakelfunctie de camera automatisch uit.
65
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft WB-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft WB-80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info