799124

Voltcraft WB-80 Manual

28
Zoom out
Zoom in
Previous page
1/80
Next page
3 Press the Up and Down button to adjust the infrared and visible light fusion ratio.
4 Press the Trigger button to take a thermal image, which will be displayed surrounded by
white boxes.
5 Press the OK button to save the captured thermal image. The thermal image is stored in the
internal storage and can be viewed by connecting the imager to a computer using the USB
cable. Press the Back button to continue to scan the target area or object.
6 While scanning an area or object, press the OK button to enter the menu options, where
various settings and information can be accessed. Press the Back/Power button to exit the
menu.
b) Power supply
• The thermal imaging camera is powered by three AAA alkaline batteries. To turn the thermal
camera on/off, long press the Back/Power button for 3 seconds.
• The battery status icon is displayed in the upper right corner. When the battery status icon is
red, the battery is low and needs changing.
• Using a battery with insufcient power may result in inaccurate temperature readings.
• If the camera is not used for 10 minutes, the APO-Automatic Shutdown feature will
automatically turn off the camera.
c) Button operation
• Back/Power
Long press to turn the camera on/off. Short press to exit menu options or delete saved
images.
• Conrm/Menu
Short press to enter menu options, conrm settings or conrm image save/delete (in Preview
mode).
• Up/down
- Short press to scroll through settings in the setup menu, scroll through saved images in
Preview mode or alter the visible-infrared blend in capture mode.
- Long press to continuously add/subtract values for settings such as emissivity.
• Hold
Press to capture an image and press again to preview an image.
28
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft WB-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft WB-80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info