536150
45
Zoom out
Zoom in
Previous page
1/102
Next page
45
The housing design only allows access to the battery and fuses when the com-
partment is open. The housing no longer needs to be fully opened and taken
apart.
This increases user safety and the user-friendliness of the device.
Proceed as follows to open the compartment:
- Disconnect all measuring lines from the meter and switch it off.
- Unscrew and remove the battery compartment screw on the back of the
device (14).
- With the attachment clip folded away, pull the battery and fuse compartment
cover (17) downwards and off the meter.
- The fuses and the battery compartment are now accessible.
- Proceed in the reverse order to close the housing and screw the battery and
fuse compartment securely into place.
- The meter is ready for use once again.
Replacing the fuse
The current measuring ranges are secured with high performance fuses. If measuring in this range is
no longer possible, you have to change the fuse.
Proceed as follows for replacement:
- Separate the connected measuring leads from the measuring circuit and the measuring device.
Switch the DMM off.
- Open the housing as described in the chapter “Opening the Measuring Instrument”.
- Replace the defective fuse with a new fuse of the same type and nominal voltage. The fuses have
the following values:
Fuse F1 F2
VC250 F10A/1000V FF 500 mA/1000V
VC270 F10A/1000V 3 x F 160 mA/600 V self-resetting, PTC
VC290 F10A/1000V FF 500 mA/1000V
Switching capacity 30 kA
Dimensions 38 x 10 mm 32 x 6.2 mm
Type SIBA® DMI Fuse SIBA® DMI Fuse
- Now, close the cover carefully again.
ƽ
Using mended fuses or bridging the fuse holder is not admissible for safety rea-
sons. This can lead to fires or to arc explosions. Never operate the measuring
instrument when it is open.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC290 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info