Manual Voltcraft VC276 TRMS (page 47 of 152) (English, German, Dutch, French)

738224

Zoom out

Zoom in

1/152

7. Product description

The multimeter (DMM) displays measurements on a digital display. The multimeter has 6000 counts (count = smallest

display value). The true RMS value is used when measuring voltages and currents. The correct socket assignment is

displayed according to the measurement mode selected. Incorrect socket assignment is indicated by a warning sound

and warning indicator. This increases the operational safety of the multimeter for the user.

If the DMM is not operated for approx. 15 minutes, the device switches off automatically. This saves battery power and

extends the period of operation. The automatic shut-off feature can be disabled manually.

The DMM can be used to take measurements up to CAT III 600 V. It is suitable for use in hobby and professional

applications.

Protective caps may be attached to the angled test lead plugs. Remove these before inserting the test leads into the

multimeter.

The DMM can be placed on a level surface using the fold-out stand for better readability.

With this multimeter, it is no longer necessary to replace a fuse that has accidentally tripped in the mA/µA measure-

mentrange.Thebuilt-inPTCprotectionelementslimitcurrentowintheeventofanoverloadandthusprotectthe

multimeter and the current circuit. The PTC protection elements reset themselves after tripping and a short cool-down

period.Forthis,thecurrentmeasurementcircuitmustonlybeinterruptedbriey.

The battery and fuse compartment can only be opened when all test leads have been removed from the multimeter.

When the battery and fuse compartment are open, the test leads cannot be inserted into the measurement sockets.

This is a built-in safety feature designed to protect the user.

Rotary control (D)

The individual measurement modes are selected via a rotary con-

trol. The automatic range selection “Auto” is active. This means

that the appropriate measurement range is set automatically. The

current measurement ranges must be set manually. Always start

current measurements with the largest measurement range, and

then switch to a smaller range if necessary.

The rotary control has a mode button (I). With the “SELECT” but-

ton, switch to a sub-mode if the measurement mode is double

assigned (e.g. switching resistance measuring for diode test and

continuity test or AC/DC switching). The sub-modes are marked

in grey. Press the “SELECT” button again to switch to the next

sub-mode.

To switch the multimeter off, move the rotary control to the “OFF” position. Always switch the multimeter off when it

is not in use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC276 TRMS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC276 TRMS Manual

Product: