Manual Voltcraft VC271 SE (page 42 of 136) (English, German, Dutch, French)

738288

Zoom out

Zoom in

1/136

7. Product description

The digital multimeter (DMM) displays measurements on a digital 4000-count display (count = smallest display value).

The display shows the correct terminal assignment for each measurement mode. The multimeter beeps and displays

a warning when the terminals are not assigned correctly. This is a built-in safety feature to protect the user.

The display also indicates the correct measurement terminals to use for each measurement mange.

The DMM switches off automatically after approximately 15 minutes if no buttons are pressed. This protects the bat-

teries and prolongs the battery life. The automatic power-off feature can be disabled.

The DMM can be used to take measurements up to CAT III 600 V. It is suitable for use in hobby and professional

applications.

The DMM can be placed on a level surface using the fold-out stand for better readability.

It is not necessary to replace a triggered fuse for mA/µA current measurements. The built-in PTC fuse restricts the cur-

rentowintheeventofanoverowtoprotectthemultimeterandthecircuit.ThePTCfuseresetsitselfautomatically

afterashortcool-downphase,meaningthatthecurrentmeasurementcircuitisonlybrieyinterrupted.

The battery and fuse compartment can only be opened when all test leads have been disconnected from the multim-

eter. It is not possible to insert the test leads into the terminals when the battery and fuse compartment is open. This

is a built-in safety feature designed to protect the user.

Control dial (D)

Use the control dial to select the measurement mode. On the VC271 SE, auto-

matic range selection (“Autorange”) is enabled and the range will be automatically

selected. The measurement ranges must be selected manually. Always start with

the largest measurement range, and then switch to a smaller range if necessary.

The control dial features a function button (I). Use the “SELECT” button to switch

to a sub-mode when the measuring mode has more than one function (e.g. to

switch from resistance measurement to diode test or continuity test or from AC

to DC current). Press the “SELECT” button again to switch to the next sub-mode.

To turn the multimeter off, move the control dial to the “OFF” position. Always turn

the multimeter off when it is not in use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC271 SE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC271 SE Manual

Product: