Manual Voltcraft VC2030A (page 34 of 80) (English, German, Dutch, French)

738291

Zoom out

Zoom in

1/80

Alternating current measurement in mA

• Connect the black measuring line to the COM socket “8” and the

red one to the socket “DC/AC mA 100 mV”.

• Set the adjustment wheel “4” to the area for current measurement

DC/AC and the slider “5” to “AC“

• Connect the two measuring prods with the object to be measured.

Make sure that the given measurement object is disconnected

from the electrical current.

• The measuring value is shown on the analogue scale “1”. Take the value and multiply it with

the values of the following table:

AC range (mA) Analogue reading scale Multiplication factor

0,25 mA 250 x 0,001

2,5 mA 250 x 0,01

25 mA 250 x 0,1

50 mA 50 x 1

250 mA 250 x 1

500 mA 50 x 10

Direct current measurement 10 A

This connection is designed for a limited period of currency

measurement only.

• Connect the black measuring line to the COM socket “8” and

the red one to the socket “DC/AC mA 100 mV”.

• Set the adjustment wheel “4” to the area for current “10 A”

and the slider “5” to “DC, , Ω“

• The measurement object must always have no electrical current passing. Observe that the

measurement does not take any more than 15 seconds. Wait at least 30 seconds between

any two measurements!

• The measured value is shown on the analogue scale “1” from 0 – 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC2030A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC2030A Manual

Product: