Manual Voltcraft VC190 (page 49 of 112) (English, German, Dutch, French)

738287

Zoom out

Zoom in

1/112

13. Replacing the Fuse

Never operate the meter if the case is open. !DANGER TO LIFE!

1. Turn the function dial to the “OFF”

position.

2. Remove the test leads from the input

terminals.

3. Unscrew then remove the battery cover.

4. Unscrew the rear cover screws.

5. Replace the fuse with one that is of the

same type and specication. Refer to

the section “Technical data” for further

information.

6. Carefully replace the covers.

14. Troubleshooting

Problem Possbile cause Suggested solution

The DMM will not power up. Flat battery Replace with new battery.

Cannot measure changes

in value.

Is the wrong measuring function

activated (AC/DC)?

Check display (AC/DC) and switch the function

if required.

Are the incorrect leads used?

Check the terminal assignment or connection

of the probe leads.

Is the HOLD function activated? Deactivate the HOLD function.

No measurement possible

in the A measurement

range

Is the fuse of the A measuring

range defective?

Check the 10 A F2 fuse

No measurement possible

in the mA/µA measurement

range

Is the fuse of the mA/µA meas-

urement range defective?

Check the 0.6 A F1 fuse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC190 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC190 Manual

Product: