738286

Voltcraft VC-5080 Manual

33
Zoom out
Zoom in
Previous page
1/100
Next page
33
• If a safe operation cannot be expected any longer, the device must be decommissioned and be secured
against accidental use. Safe operation is no longer guaranteed when:
- the device is visibly damaged
- the device no longer works and
- the device was stored for a long period of time under adverse conditions or
- after mishandling during transportation.
• Never switch on the multimeter immediately after it has been taken from a cold to a warm environment.
The condensation generated could destroy the product. Leave the device turned off until it has reached
room temperature.
• Do not leave packaging material unattended, as children could use it as a toy creating hazardous situ-
ations.
• Observe all other safety instructions in each chapter of these instructions.
7. Product description
The analog multimeter (henceforth referred to as multimeter) features a shock-absorbent dial instrument. The scale
is outtted with a mirror to allow exact readings at all times. The meter movement is suspended by a metal band (taut
band) to guarantee lossless measurement operation.
The multimeter can be used in any operating position. The stand at the back allows the multimeter to be set up in a
slightly inclined position which makes reading the display during measurement operation easier. The integrated and
removable side rubber guard shields the multimeter from blows.
The current measuring ranges are secured against overload with a ceramic high-performance fuse.
Use the rotary switch to select the desired measuring function and measuring range. The multimeter is off when the
switch is at position “OFF”. Always turn off the multimeter when it is not in use.
The multimeter is intended for use in both the hobby and professional sectors.
The following batteries are required for power supply:
1 x 9 V block + 2 x micro (AAA).
There are protective transport caps in the included test leads’ angled plugs. Remove them before inserting the plugs
into the DMM’s sockets.
The caps may be reattached after use for protection during transport.
The scale indicator can be calibrated using the adjustment screw. Calibrate the scale indicator before each use to
avoid measuring errors.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC-5080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-5080 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info