Manual Voltcraft VC-10 (page 46 of 106) (English, German, Dutch, French)

536143

Zoom out

Zoom in

1/106

g) DC/AC current measuring

Current measuring operations are possible in two ranges. The first

range is 0 to 4000µA, the second 0 to 200mA. Both current measu-

ring ranges are provided with fuses and thus protected against

overload.

Proceed as follows to measure direct currents:

• If you want to measure currents of up to

max. 4000µA, set the rotary switch (1) to

position „µA“ or to position „mA“ res-

pectively up to max. 200 mA. The dis-

play shows „DC“

• Now connect the two test prods in

series with the object to be measured

(battery, switching etc.); the polarity of

the measuring figure concerned will be

indicated together with the current mea-

suring value on the display.

Proceed as described above to measure

alternating currents:

For alternate current measuring, press the button „MODE“ (3) to

switch to the AC range. Pressing this button again, takes you back.

In the µA/mA range, DO NOT measure any currents

above 200 mA, otherwise the fuse triggers.

If the fuse triggered (no measuring value changes etc.), turn the

DMM off (OFF) and wait approx. 5 minutes. The self-resetting fuse

cools down and then functions again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-10 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC-10 Manual

Product: