Manual Voltcraft P-100 (page 13 of 16) (English, German, Dutch, French)

536358

Zoom out

Zoom in

1/16

Manipulation

Alimentation électrique

Déterminez l’alimentation électrique désirée. Vous avez le choix entre une ali-

mentation par bloc enfichable (prise 230 V CA) et une alimentation par l’allume-

cigare (câble adaptateur 12 V) dans un camping-car, un véhicule ou autre :

Bloc d’alimentation enfichable : Pour le fonctionnement du P-100 avec le

bloc d’alimentation, branchez le bloc d’alimentation sur une prise (230 V/50 Hz).

Câble adaptateur 12 V : Branchez le câble adaptateur 12 V sur l’allume-

cigare.

Enfichez ensuite la fiche femelle du bloc d’alimentation ou le câble adaptateur

12 V dans la prise d’entrée CC située sur l’avant du chargeur.

Remarque !

Utilisez uniquement les pièces fournies servant à l’alimentation du

P-100. L’utilisation d’autres types d’alimentation électrique pour-

rait endommager le chargeur.

Chargement d’accumulateurs cylindriques

- Mettez en place les accumulateurs cylindriques par deux (voir Fig.1 et

Fig.2) dans le chargeur.

Remarque !

Respectez impérativement la polarité ! Le pôle positif de l’accumu-

lateur doit être dirigé vers les diodes électroluminescentes du

chargeur.

Les accumulateurs doivent être mis en place par deux unique-

ment. Veillez à ce que les deux d’accumulateurs soient de même

type, taille et capacité et à ce que leur état de charge soit le plus

similaire possible.

Operation

Voltage supply

Determine the desired voltage supply. You can choose between a plug-in

power supply for 230V AC sockets and a 12V adapter cable for cigarette

lighters in camping vans, cars, etc.

Plug-in power supply:To operate the P-100 with the power supply, insert the

power supply into a socket (230V 50Hz) .

12V adapter cable: Plug the 12V adapter cable into a cigarette lighter socket.

Now insert the hollow plug of the power supply or the 12V adapter cable into

the DC input jack on the upper face of the charger.

Note.

Only use the parts provided to supply power to the P-100. Other

power supplies can destroy the charger.

Charging round cell batteries

- Insert the round cell batteries in pairs (see figure 1 and figure 2) into the

charger.

Note.

Ensure that the polarity is correct. The positive pole of the battery

must point towards the light emitting diodes.

The batteries may only be inserted in pairs. Ensure that the type,

size and capacity of the battery pairs are the same. The charge

status of the battery pairs must be as similar as possible to each

other.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft P-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft P-100 Manual

Product: