Manual Voltcraft CT-5 (page 24 of 42) (English, German, French)

633396

Zoom out

Zoom in

1/42

Measuring process

- Connect the cable tester and the Remote Terminator with the

cable which is to be tested or for example with the included RJ 45

test cable.

- after pushing the TEST-button the electricity supply of the cable

tester is switched on automatically. The green POWER-LED in the

display glows. At the same time the automatic measurement

process of all single cores is started. as a control the LEDs 1 - 8

glow one after another in quick order. Additionally the cable tester

produces a signal sound.

- after the measuring has been completed successfully the blue

CONNECTED-LED glows as sign that the measured cable is a

1:1 cable without twisted cores. At the same time a signal sound

is produced again, but in a higher frequency. If the 8 cores are all

correctly connected the LEDs 1-8 will glow permanently on the

display. For the control of the measuring result a table is dis-

played below the LED row which shows the respective light dis-

plays fort he different connection cables.

☞

The LED signed with G = Ground will only glow on the IN dis-

play if both RJ 45 plugs are made of material which is electri-

cally conducting and are connected by means of the shiel-

ding within the cable (STP-cable). That is not the case with

unshielded cables (UTP cables)

- after approx. 5 sec. All LEDs on the display will go out and the

cable tester turns off automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft CT-5 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft CT-5 Manual

Product: