633395
22
Zoom out
Zoom in
Previous page
1/34
Next page
RJ 11-Kabel
- to test cables with RJ 11 plug connections, please use the two
reducing parts RJ 45/RJ 11. the reducing parts are simply insert-
ed into the wanted RJ 45 jack of the cable tester or of the
Remote-Terminators. - the testing process is similar to the one of
the RJ 45 cables but now only the 6 or 4 LEDs in the middle on
the incoming side are gated.
BNC-cables
- for the testing of coaxial cables with BNC-plugs, please use the
two RJ 45/BNC-adapter cables which are included in the scope of
delivery. The adapter cables are just plugged into the respective
RJ 45 jack of the cable tester or the Remote-Terminators and can
be connected with the BNC-connection plug for test purposes.
- because of the fact that at this test the inner conductor is dis-
played LED 1 and the shielding with LED 2 we recommend to do
this test in the manual mode.
Maintenance and care
Except of a battery change from time to time, the cable tester is is
maintenance free. You can find information on the battery change
in the respective chapters of the operation manual. On the outside,
the cable tester should only be cleaned with a soft, dry cloth or
brush. Under no circumstances use aggressive detergents or chem-
ical solvents, because the surfaces of the housings could be dam-
aged. Furthermore the fumes are explosive and hazardous to health.
Environmental advice
Disposal of used batteries/accumulators!
You as user are legally obliged (battery regulation) to return all
used batteries and accumulators; a disposal into the normal
house waste is prohibited!
21
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft CT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft CT-2 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info