536352
19
Zoom out
Zoom in
Previous page
1/136
Next page
19
12. Ladeprogramm „LiPo BALANCE CHG“
Dieses Ladeprogramm ist nur geeignet für LiPo-Akkus mit einer Spannung von
3.7V pro Zelle, die über einen Balancer-Anschluss verfügen. Versuchen Sie
niemals, einen anderen Akku mit diesem Ladeprogramm aufzuladen.
Der einzustellende Ladestrom ist abhängig von der Kapazität des Akkus und sollte üblicher-
weise 1C betragen. Beachten Sie dazu jedoch die Angaben des Akkuherstellers.
Die Angabe „1C“ bedeutet, dass der Ladestrom dem Wert der Kapazität des Akkus entspricht.
Bei einem 1800mAh-LiPo-Akku ist bei 1C also ein Ladestrom von 1.8A einzustellen.
Im Gegensatz zum einfachen LiPo-Ladeprogramm „LiPo CHARGE“ wird hier die Spannung
jeder einzelnen Zelle überwacht und der Ladestrom entsprechend eingestellt.
Nur ein LiPo-Akku mit exakt gleicher Spannung pro Zelle liefert die maximale
Leistung und Betriebsdauer für ein Modellflugzeug/-fahrzeug.
Aufgrund von Schwankungen in der Materialqualität und dem inneren Aufbau
von mehrzelligen LiPo-Akkus kommt es beim Entladen dazu, dass die Zellen
am Entlade-Ende eine unterschiedliche Spannung haben können.
Lädt man solch einen LiPo-Akku ohne Balancer, stellen sich sehr schnell große
Unterschiede in der Zellenspannung ein. Dies führt nicht nur zu einer kürzeren
Betriebsdauer (weil eine Zelle in der Spannung einbricht), sondern der Akku
wird durch eine Tiefentladung beschädigt.
Weiterhin besteht beim Aufladen solcher unterschiedlicher Zellen (mit ver-
schiedener Spannung) ohne Balancer die Gefahr der Überladung: Die maxi-
mal zulässige Spannung einer LiPo-Zelle von etwa 4.2V (+/- 1%) wird über-
schritten!
Beispiel:
Nach außen hin hat ein ohne Balancer geladener LiPo-Akkupack mit 2 Zellen
eine Spannung von 8.4V und erscheint damit voll geladen. Die einzelnen
Zellen haben aber eine Spannung von 4.5V und 3.9V (eine Zelle ist gefährlich
überladen, die andere halb leer).
Eine solch überladene Zelle kann auslaufen oder im schlimmsten Fall in
Brand geraten oder explodieren!
Sollte Ihr LiPo-Akkupack über einen Balancer-Anschluss verfügen, ist deshalb
immer das Ladeprogramm „LiPo BALANCE CHG“ zu benutzen.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft B5 Multi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft B5 Multi in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info