536360
21
Zoom out
Zoom in
Previous page
1/29
Next page
50
The higher the internal resistance of the battery, the worse the voltage
curve under load conditions, and the more dissipated power is con-
verted into heat within the cell and at the parasitic transfer resistance
points. At high currents parasitic resistances in the mOhm range can
certainly cause considerable voltage losses at the motor or other
consumer.
The Ri function can also be used as a straightforward means of
measuring internal resistance in the system as a whole. First set the
pulse current, then press the “OK / Menubutton again to move to
the main Ri measurement function window. Confirming again initiates
the measurement function (Fig. 23).
When you start this function, ten values are recorded in sequence, at five-second intervals, and the
results are displayed on the screen: the measured internal resistance is shown in the lower graphic
area of the screen, while the top half of the screen displays the battery voltage in the zero-load state,
the voltage under load, and the pulse current which is actually flowing.
The Ri measurement function concludes automatically, after which the last recorded measured values
continue to be displayed on the screen. If you wish to record a further series of ten measured values
under the same conditions, simply press the “OK / Menu” button once more.
When Ri values are actively being measured, the bottom section of the screen indicates this (count-
down to the next measured value).
If you wish to change the pulse current for the internal battery resistance measurement process,
simply press the “” button briefly: you can then set the desired current (in increments of 500 mA)
using the jog dial, and confirm your selection by pressing the “OK / Menu” button. When you initiate
the process again, the internal resistance will be measured using the new set current.
Press the button to conclude the battery Ri measurement function; confirm your selection by
pressing “OK / Menu” again, and you are returned to the “Main Menu”.
Note: optional measuring cable required.
Fig. 23: Main Ri measure-
ment function window
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft ALC 8500 EXPERT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft ALC 8500 EXPERT in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voltcraft ALC 8500 EXPERT

Voltcraft ALC 8500 EXPERT User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info