536360
16
Zoom out
Zoom in
Previous page
1/29
Next page
45
12.3 Conf. Bat. (configuring batteries)
If you select “No Name” at the “Battery stage, you now have to
configure the battery to be charged. When you call up the menu, the
window shown in Fig. 11 appears.
First you must confirm your selection with the “OK / Menubutton,
then select the battery technology (type). Confirm your choice again,
then enter the nominal capacity of the pack using the jog dial. To speed
up data input you can edit the point to be changed (flashing) using
the arrow buttons (Fig. 13). Confirm the selected capacity, then enter
the nominal battery voltage in the same manner (Fig. 14). The actual
increments available are determined by the battery technology (type) you selected earlier.
Fig. 12: Supported battery technologies
When you have entered the nominal voltage, select the charge current and the discharge current in
turn; note that the program presents fixed pre-set charge / discharge
rates to speed up the data entry process.
Fig. 15 shows the basic options for charge current and discharge
current, while Fig. 16 shows the associated display window.
When you are selecting the charge current please note that the char-
ge rates 2C and 4C are only available at channel 1 if the (optional)
temperature sensor for super-fast charging is connected to the socket
on the back panel.
For those functions which consist of several automatic charge / di-
scharge cycles it is possible to enter a defined interval between the
termination of the charge process and the start of the subsequent
discharge process (Fig. 17). A brief press of the “OK / Menu” button
calls up the appropriate data entry window, where the time setting is
entered in the usual way using the jog dial or the arrow buttons. This
completes the battery data input process.
Now pressReturn” to confirm your selection - assuming that you do
not wish to make corrections to any of the individual inputs - and the
program returns to “Chan-Menu”, where you can now select the
processing program (“Function”) you wish the charger to carry out
(Fig. 18). The battery data input process described above is not ne-
cessary if you intend to charge a battery whose data is already stored
in the database. In this case you simply select the desired battery from
the database, after which the program moves directly to the selection
menu for the processing program (“Function”).
Fig. 11: Selecting the batte-
ry technology
Fig. 13: Entering the nomi-
nal battery capacity
Fig. 14: Entering the nomi-
nal battery voltage
Fig. 16: Selecting the charge
current
Fig. 15: The fixed pre-set
charge rates of the ALC
8500-2 Expert
C/5C/10 C/3 C/2
4C 2C 1C
C/20
direct
NC
NiMH
Li Ion
Li Pol
Pb
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft ALC 8500 EXPERT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft ALC 8500 EXPERT in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voltcraft ALC 8500 EXPERT

Voltcraft ALC 8500 EXPERT User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info