Manual Voltcraft 4500PRO D (page 33 of 56) (English, German, Dutch)

610366

Zoom out

Zoom in

1/56

e) Overload setting:

1. Press SET button once. The “W” value (Watt) starts ashing (g. 27).

2. Use or buttons to set the max. current at which the device should activate an overload

alarm and press SET to conrm. Set each digit separately.

g. 25

g. 27

g. 26

The purpose of the OVERLOAD function is to protect the connected household electrical appliance

from damage due to power overload. If the set alarm limit will be exceeded during operation of the

connected appliance, a buzzer tone will sound and “OVERLOAD” will be ashing in the display. Turn

off the connected appliance and disconnect it from the mains supply if necessary for overload and

hence for safety reasons.

Press button to switch to the area for deleting user settings “CLR settings”.

Press button a second time to skip this area if you do not wish to change user settings.

f) CLR settings:

Two functions are available in this area:

1) „CLr ALL dAtA“: All data will be deleted and all settings will be reset to the default values.

2) „CLr USEr SEt“: All user settings will be deleted.

1. Press SET button once. The display will show “CLr” (g. 28).

2. Press SET button one more time. The display will show “CLr ALL dAtA” (g. 29).

3. Press or buttons. The display will show “CLr USEr Set” (g. 30).

4. Press and hold F button (4) for approx. 3 seconds. The following set values will be deleted:

electricity rate, standby power, GHG/CO2, max. power.

5. Press or buttons. The display will show “CLr ALL dAtA”. Press and hold F button for approx.

3 seconds. Following values will be deleted:

kWh, energy costs, saved time, greenhouse gas/CO2, max. Watts and Ampere values

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft 4500PRO D in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft 4500PRO D Manual

Product: