610366

Voltcraft 4500PRO D Manual

28
Zoom out
Zoom in
Previous page
1/56
Next page
28
6. DELIVERY CONTENT
• Energy costs meter
• Operating instructions
7. START-UP
If overloaded, the product might get damaged. The warranty will get void in such
a case.
Do not plug several energy consumption meters together.
The device is not suitable for use in explosive environments.
Avoid the proximity of strong magnetic elds (engines, etc.).
Avoid impact and strong vibrations as well as operation in direct sunlight.
CAT II The device complies with the measuring category II for use with appliances that
are directly connected to the public power grid by use of a mains plug.
Connect the energy costs meter to a normal isolated ground receptacle in your home featuring a
230 V/AC 50 Hz alternating voltage.
Make sure the electric appliance to be measured is turned off. Connect the mains plug of the electric
appliance to the isolated ground receptacle (1).
Turn on the electric appliance and wait a few seconds until the meter displays the rst readings.
Before you can use all functions of the device you will have to perform some settings and familiarize
yourself with these operating instructions.
This power consumption meter features two display modes:
CURRENT and FORECAST
The current mode displays all data (power consumption, electricity costs, etc.) as accumulated
values. In forecast mode all data of the consumption forecast are based on a xed time frame such
as one day, one week, one month or one year.
CURRENT (current mode) – accumulated values
FORECAST (forecast mode) – consumption forecast for power and costs (per day,
week, month or year)
The current mode features 4 display functions:
ON: Online operation; Standby: Energy Costs Meter in Stand-by-operation; OFF: Energy Costs Meter
in Ofine operation; no display: total value.
Using these display functions requires you to enter the value for standby beforehand. The default
value for standby is 0.5 W.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft 4500PRO D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft 4500PRO D in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info