536355

Voltcraft 4 IN 1 MULTI Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
OPERATING INSTRUCTIONS
VERSION 06/13
4 IN 1 MULTI CHARGER MC 1.2
ITEM NO.: 40 51 71
INTENDED USE
This multi charger has been designed to charge information technology equipment such as
mobile phones or multi media devices using a charging voltage of 5 V/DC. The charging
current is 1000 mA at most. The multi charger features four different inputs for its power
supply. Select between mains, vehicle, USB and 9V block battery operation modes.
The charging rate of your appliance must not exceed the rated current of the multi charger.
Exceeding the current rate will cause the charger to overload. In case of overloading, caused
for example by short circuits or constant excess current drain, the output will be reduced.
Operation under adverse ambient conditions is not permitted. Adverse ambient conditions are
dened as such:
• wetness or high humidity
• dust and ammable gases, vapors or solvents
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short circuiting, re, electric
shock etc. Read the instructions carefully and keep them. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
• Multi charger MC 1.2
• 4 mains adapters (Europe, USA, England, Australia)
• 5 low voltage mains adapters (micro USB plug, mini USB plug, USB port, Nokia® Ø3.5 mm,
Nokia® Ø2.0 mm)
• USB Y adapter
• Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment of the government safety organization or the
corresponding authority for your country.
• The product gets hot during operation. Ensure sufcient ventilation. Do not cover
the housing!
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. The plug-in
power supply unit also involves danger to life by electric shock! Allow the product
to reach room temperature before connecting it to the power supply and putting it
to use. This may take several hours.
• The device was constructed according to protection class II. Only a proper mains
socket (230 V/AC, 50 Hz) of the public supply net must be used as voltage
source.
• Only use indoors in dry locations.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
If you are not sure about the correct connection or use, or if questions arise which are not
covered by these operating instructions, please do not hesitate to contact our technical
support or another qualied specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 96 04 / 40 87 80
OPERATION
The multi charger features 4 different inputs for its power supply. Only one input may be
connected!
When connected to the power supply, the power indicator lights up. If you do not want to use
the multi charger, disconnect it from the respective power supply source in order to avoid
unnecessary power consumption.
a) Connection of the low voltage mains adapter
1. Select an adapter suitable for your appliance.
2. The polarity is mechanically xed and cannot be modied. Connect the desired low voltage
plug properly to the external connection cable with round socket. Round sockets feature a
xed polarity (plus “+” inside, minus “-” outside).
3. Switch off your appliance before connecting the multi charger in order to avoid sparking.
4. Regularly check the product for technical safety, e.g. damage of the housing.
5. Have repairs done by qualied experts only. Unauthorized modications or repairs of or
inside the product will void the warranty.
b) Mains operation mode
1. The multi charger is suitable for worldwide use. The provided mains adapters allow for a
direct connection to the most common wall socket systems.
Only replace the mains adapter when disconnected from the power supply! Make
sure the mains adapter and the multi charger are securely locked!
2. Insert the mains adapter into the tting of the housing
and push until it reaches the end and locks into place.
3. In order to replace and remove the mains adapter,
unlock it by pressing down the lock mechanism and
then slide the mains adapter upwards to remove.
c) Vehicle operation mode
1. The multi charger features a lateral vehicle plug that can be connected to any vehicle
power supply jack featuring a direct current of 12-13.8 V. Make sure to connect the plus
terminal to the center contact of the vehicle power supply jack.
2. In order to perform the connection, ip the housing open at the side and release the vehicle
plug. Then connect the plug to the vehicle power supply jack.
d) USB operation
1. The multi charger allows for power supply via USB ports at computers and notebooks.
2. Pull the lateral USB plug from the socket in the multi charger and connect it to a free USB
port.
Normal USB ports feed the most common appliances with a current of max.
500 mA. Make sure your appliance does not exceed the maximum current.
Exceeding the current might cause overloading or activate the safety mechanism in
the computer or notebook.
If you require a current higher than 500 mA (USB2.0) or 900 mA (USB3.0) respectively,
use a Y adapter that combines the current of two USB ports (the multi charger limits the
charging rate to a maximum of 1000 mA). The Y adapter is included.
e) 9V battery operation
The multi charger can be connected to a 9V block battery for power supply.
Connect the block battery to the lateral connector intended for 9V block batteries, thereby
observing the correct polarity. When charging is complete, remove the battery in order to
prevent untimely discharging.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft 4 IN 1 MULTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft 4 IN 1 MULTI in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info