708062
672
Zoom out
Zoom in
Previous page
1/684
Next page
The procedure for attaching and for removing the jumper cables is described below. Perform each of
the following steps only in the order in which it is described.
Before you begin
Switch off the ignition in both vehicles.
Open the hoods of both vehicles.
Remove the cover from the positive terminal on your vehicle and, if necessary, the battery cover of
the other vehicle.
Diagram A: Attaching jumper cables
Diagram A applies where the vehicle with the dead battery has jump-start terminals (1) and is being
jump-started by a vehicle whose battery is in the engine compartment (2) ⇒  .
1. Attach one end of the red jumper cable to the positive jump-start terminal
(+) of the vehicle with
the dead battery (1).
2. Attach the other end of the red jumper cable to the positive terminal
(+) of the booster battery (2).
3. Connect one end of the black jumper cable to a suitable ground connection
(3) on the vehicle with
the booster battery
(2). A suitable ground connection is a solid metal part bolted directly to the en-
gine block of the vehicle with the booster battery or this vehicle's engine block itself.
4. Attach the other end of the black jumper cable to the negative jump-start terminal
(-) of the
vehicle with the dead battery
(1).
Diagram B: Attaching jumper cables
Diagram B applies where the dead battery (1) is in the engine compartment of the vehicle being jump-
started, and the vehicle providing starting assistance has jump-start terminals
(2) ⇒  .
1. Attach one end of the red jumper cable to the positive terminal
(+) of the dead battery (1).
2. Attach the other end of the red jumper cable to the positive jump-start terminal (+) of the vehicle
providing starting assistance (2).
3. Attach one end of the black jumper cable to the negative jump-start terminal
(-) of the vehicle
providing starting assistance (2).
4. Connect the other end of the black jumper cable to a suitable ground connection (3) on the vehicle
with the dead battery
(1). A suitable ground connection is a solid metal part bolted directly to the
engine block of the vehicle with the dead battery or this vehicle's engine block itself.
Diagram C: Attaching jumper cables where both vehicles have jump-start terminals
Diagram C applies where the vehicle with the dead battery has jump-start terminals (1) and is being
jump-started by a vehicle that also has jump-start terminals (2) ⇒  .
1. Attach one end of the red jumper cable to the positive jump-start terminal
(+) of the vehicle with
the dead battery (1).
2. Attach the other end of the red jumper cable to the positive jump-start terminal
(+) of the vehicle
providing starting assistance (2).
3. Attach one end of the black jumper cable to the negative jump-start terminal
(-) of the vehicle
providing starting assistance (2).
4. Attach the other end of the black jumper cable to the negative jump-start terminal (-) of the
vehicle with the dead battery
(1).
Starting the engine
1. Start the engine of the vehicle with the good battery that is providing help and let it run at idle
speed.
672


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volkswagen Touareg 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volkswagen Touareg 2015 in the language / languages: English as an attachment in your email.

The manual is 9,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info