708062
649
Zoom out
Zoom in
Previous page
1/684
Next page
Vigorously shake the tire inflation cylinder ⇒ fig. 343 (10) a few times back and forth.
Tightly screw the filling hose ⇒ 
fig. 343 (3) to the tire inflation bottle (turn clockwise). The foil on the
seal is automatically pierced.
Remove the sealing plug from the filling hose ⇒ 
fig. 343 (3) and slide the open end onto the tire
valve.
Hold the cylinder with the bottom pointing up and fill the entire contents of the tire inflation cylinder
into the tire.
Detach the empty tire inflation cylinder from the valve.
Using the valve core wrench ⇒ 
fig. 343 (1) screw the valve core back into the tire valve.
Inflating the tire
Screw the tire inflation hose ⇒ 
fig. 343 (5) of the air compressor tightly to the tire valve.
Check whether the air release valve ⇒ 
fig. 343 (7) is screwed on tightly.
Open the engine hood ⇒  Working in the engine compartment.
Attach the cable clips ⇒ fig. 343 (9) only to the jump-start terminals in the engine compartment
⇒ 
fig. 344. The red clip on the compressor cable is connected to the positive (+) terminal; the black clip
is connected to the negative terminal
(—).
Start the vehicle engine and let it run.
Switch the air compressor on using the ON / OFF switch ⇒ 
fig. 343 (8),
Let the air compressor run until a pressure of 36 44 psi (250 - 300 kPa) is reached ⇒ 
. Maxi-
mum run time 8 minutes ⇒ 
.
Switch off the air compressor.
If an air pressure of 36 44 psi (250 - 300 kPa) cannot be reached, unscrew the tire inflation
hose from the tire valve.
Drive about 30 feet (10 meters) backwards or forwards so that the sealant can be distributed inside
the tire.
Connect the tire inflation hose of the air compressor again to the tire valve and repeat the inflation
process.
If the required tire pressure still cannot be reached, the tire is too badly damaged. The tire cannot
be sealed using the tire mobility set. Do not drive the vehicle. Get professional assistance ⇒ 
.
Disconnect the air compressor and unscrew the tire inflation hose from the tire valve.
If a tire pressure of 36 44 psi (250 300 kPa) is reached, continue driving right away and drive at
a speed of not more than 50 mph (80 km/h).
Check tire pressure after 10 minutes of driving ⇒  Check after 10 minutes of driving.
WARNING
The tire inflation hose and air compressor can get hot during inflation.
Protect hands and skin from hot parts.
Do not place the hot tire inflation hose or hot air compressor on flammable material.
Let the equipment cool off almost completely before stowing it.
If the tire cannot be inflated to at least 36 psi (250 kPa), the damage is too great to be re-
paired with the tire mobility set. The sealant is not able to seal the tire. Do not drive the vehi-
cle. Get professional assistance.
649


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volkswagen Touareg 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volkswagen Touareg 2015 in the language / languages: English as an attachment in your email.

The manual is 9,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info