625932
58
Zoom out
Zoom in
Previous page
1/81
Next page
RNS 310, RNS 315
Press the function button in the Info
window.
Press the function button in the pop-
up window.
The route list corresponding to the active route
guidance is calculated and displayed page 53,
fig. 68.
The route list displays street names or designa-
tions which must be passed until the next turn.
These are referred to as “route sections”. All route
sections which must be passed prior to the next
destination are displayed.
In addition, there is an indication of the distance
to be covered on a route section as well as the esti-
mated time until the next turn is reached.
Turn the adjustment knob page 6, fig. 1 to
browse the route list.
Press the tuning knob or press the Details func-
tion button to see an information window with
more detailed information regarding a marked
stretch of the route.
Press the button to close the Info window.
Showing partial sections
An arrow behind an entry in the route list signi-
fies that other sections can be displayed as well.
Mark the entry with an arrow by turning the
tuning knob and press to “unfold it” and show the
partial sections. The arrow will change to .
Press the entry with an arrow to hide the par-
tial sections.
RNS 315: Manually blocking sections in the Route list
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions on
page 49.
Displayed route sections can be excluded individ-
ually for the calculation or in combination with
others. Only one exclusion can be entered at a
time.
Displaying the route list page 53
Rotate the tuning knob page 6, fig. 1 to tag
the route section that is to be excluded.
Press the function button.
The entry is marked as excluded and the function
button switches to .
When the function button is displayed
in the route list instead of , a section exclu-
sion has already been entered.
Mark the route section that is to be excluded
and press the function button.
If the function button appears to be inac-
tive, the section to be blocked is too long. (Max)
will be displayed after a length at the bottom of the
screen.
Shorten the section of the route to be blocked
until the (Max) disappears and the function
button becomes active again. Show parts of a route
section page 54.
If a block has been entered, the route list will be
closed.
The route is will be recalculated as long as the nav-
igation system can determine a reasonable detour
to avoid the blocked section.
Removing a block
Press the button in any of the navigation
menus (except for SETUP).
Press the function button in the Info
window.
Press the function button in the
pop-up window.
OR: Open the Route list and press the
function button.
Information regarding exclusion starting
with the vehicle location page 55.
Blocked sections are displayed on the map
page 51.
Route
Route list
A
10
A
10
Exclude
Exclude to
Remove block
Block to
Block to
Block to
Block to
Route
Remove block
Remove
Navigationssystem_111.5U6.N31_23.book Seite 54 Donnerstag, 22. April 2010 5:16 17
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volkswagen RNS 315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volkswagen RNS 315 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info