708073
390
Zoom out
Zoom in
Previous page
1/398
Next page
2. Disconnect the black (-) cable from the other vehicle (vehicle with the good battery that is provid-
ing starting assistance).
3. Disconnect the red (+) cable from the vehicle with the good battery that is providing starting assis-
tance.
4. Disconnect the red (+) cable from your vehicle with the dead battery.
5. Close the fuse box cover in your vehicle.
6. If necessary, unscrew the towing eye on the front of the vehicle ⇒  Installing the front towing eye.
WARNING
Improper use of jumper cables when jump-starting a vehicle with a dead battery can cause
the battery to explode, leading to serious personal injury. To help reduce the risk of battery
explosion:
All work on the batteries or the electrical system in your vehicle can cause serious acid
burns, fires, or electrical shocks. Always read and heed the following WARNINGS and safety
precautions before working on the batteries or the electrical system ⇒  12 Volt vehicle bat-
tery.
Always wear proper eye protection. Never lean over the vehicle battery.
Attach the jumper cables in the correct order: first the positive cable, then the negative
cable.
Never connect the negative cable from the vehicle providing starting assistance to parts
of the fuel system or to the brake hoses or brake lines.
Never allow the non-insulated parts of the battery clamps to touch.
Never allow the jumper cable attached to the positive battery terminal to contact metal
parts of the vehicle.
Check the battery acid level indicator window on the 12 Volt vehicle battery. Use a flash-
light, never a match, cigarette lighter, or other open flame. If you cannot see the color of the
window clearly, or if it is light yellow or colorless, do not jump-start the vehicle. Get expert
assistance.
Avoid electrostatic discharge in the vicinity of the vehicle battery. Sparks may cause the
hydrogen gas escaping from the vehicle battery to ignite.
Never jump-start a vehicle with a battery that is damaged or frozen or that was frozen and
has thawed. The battery can explode. Replace the battery instead.
Always follow the instructions of the jumper cable manufacturer.
Always make sure that the battery providing starting assistance has the same voltage as
the dead 12 Volt vehicle battery in your vehicle and about the same capacity (see battery
label).
Batteries give off explosive hydrogen gas. Always keep fire, sparks, open flame and smok-
ing materials away from batteries.
Never connect the negative cable from the vehicle with the good battery that is providing
starting assistance directly to the negative terminal of the dead battery on your vehicle. The
hydrogen gas from the battery is explosive.
Never short out the battery terminals by connecting the positive (+) and negative (-) termi-
nals with each other.
NOTICE
To help prevent extensive damage to your hybrid vehicle's electrical system, read and heed the
following:
390


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Volkswagen Jetta Hybrid 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Volkswagen Jetta Hybrid 2015 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info