Manual Vlectro VL-AT (page 71 of 77) (English, German, Dutch, French, Italian, Polish, Spanish)

743027

Zoom out

Zoom in

1/77

Vlectro VL-AT

Po rozgrzaniu przejdzie w tryb ogrzewania, aby aktywować nagrzewanie czujnika,

(odliczanie 19 s (19-00)), aby czujnik działał lepiej i czujniej.

Interfejs odliczania

➢ Wskazówki: ustawienie poziomu alarmu

W stanie samokontroli i podgrzewania, naciśnij dwukrotnie przycisk , aby przejść do

trybu ustawiania poziomu alarmu. Krótko naciśnij ponownie przycisk , aby wybrać

poziom alarmu jako b2, b3, b5, b8 po ustawieniu, odczekaniu 2 sekundy, urządzenie

automatycznie przejdzie w tryb testowy.

b2: Oznacza poziom alarmu jako 0.20‰ BAC (=0.020%BAC lub 0.100mg/L)

b3: Oznacza poziom alarmu jako 0.30‰ BAC (=0.030%BAC lub 0.150mg/L)

b5: Oznacza poziom alarmu jako 0.50‰ BAC (=0.050%BAC lub 0.250mg/L)

b8: Oznacza poziom alarmu jako 0.80‰ BAC (=0.080%BAC lub 0.400mg/L)

4.3 Test oddechu

Po 19 sekundach ogrzewania, gdy miga „BLOW”, ustnik może wykonać test oddechu

aparatu. Naciśnij jednokrotnie przycisk WŁ./ WYŁ. podczas rozpoczynania testu

oddechu, próbka zostanie pobrana. „BLOW“ miga przez około 25 sekund, proszę w tym

czasie przeprowadzić pomiar.

Przedmuchaj ustnik w sposób ciągły przez około 5 sekund, podczas dmuchania słychać

ciągły dźwięk. Przestań dmuchać tylko do momentu, gdy sygnał dźwiękowy ustanie wraz

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vlectro VL-AT in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vlectro VL-AT Manual

Product: