818439

Vlectro OP-011751 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
6
EN
Please read the instruction carefully before installation and use.
Specifications
Receiver: AC 85 – 260V
Baery (transmier):
12V 23A (included)
Range: Up to 150m
Sound level: 0 - 100dB,
4 levels (mute included)
Transmission frequency:
433.92 MHz
Accessories
Transmier
Receiver
12V 23A baery
Mounting screws
Double-sided tape
Installation
You can install the transmier with either double-sided tape or screws:
1. To mount with screws, open the transmier with a screwdriver. Penetrate the two holes
at the back cover with two screws. Then fix the screws on the wall at a suitable height.
Mounting on UPVC or metal doorframe surfaces will reduce the transmiing range.
To install using screws you will require a drill and cross-headed screwdriver.
IMPORTANT: Prior to drilling any holes into the wall, ensure that there are no cables or
pipes present that may be inadvertently damaged.
2. Use the double-sided adhesive tape to fix the transmier on the wall.
Receiver
Plug the receiver into any standard domestic socket.
Door Chime
Press the buon on the transmier once to send a wireless signal to the receiver which
will then chime. Holding the buon will not repeat the sound.
Melody
When you plug the receiver in, you can press the buon to switch to another melody.
Important
1. The receiver is only for use indoors.
2. Don't aach the transmier to a metal surface or a UPVC doorframe, as this will lessen
its operation range.
3. Avoid exposing the receiver to water or submerging any of the units in water
4. Do not install either device near a fireplace or subject it to high temperatures.
5.If you're not using the doorbell for a long time, unplug the receiver from the socket and
take out the baery from the transmier to stop it from leaking.
6. Dispose of the old baery in accordance with the applicable laws.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vlectro OP-011751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vlectro OP-011751 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info