784603
4
Zoom out
Zoom in
Previous page
1/4
Next page
How to Re-collimate the VMC260L Optical Tube
1. Re-collimation of the optical axis will go much faster if you have an assistant.
2. The star image will shift considerably even if the collimation screws are adjusted only a small amount.
3. If one of the three collimation screws comes to the end in either direction, turn the other two collimation screws on the opposite
side to the reverses so that you can continue the re-collimation.
4. Optical collimation is very delicat and you should avoid turning the collimation screws excessively.
Specifications Handling and Storage
There are threee Allen
screws for collimation
which are placed near
the center the four-
vane spider on the
front of the optical
tube.
Attach an eyepiece with
medium power (60X to
80X) onto the eyepiece holder and get a relatively bright
star such as the Polar star into the telescope´s field of view.
Turn the focus knob to defocus the star image fully until it
is enlarged and blurred as much as one third of the viewing
field. The silhouette of the secondary mirror is seen near the
center of the
blurred star
image at this
time.
RE-COLLIMATION
If the optical axis is aligned correctly, both the blurred star
image and silhouette of the secondary mirror can be seen at
the center of the telescope‘s field of view. If it is not aligned
concentrically, move those images to the center of the field
of view. With an Allen wrench, adjust the collimation screw
nearest or furthest from the direction of those images.
The VMC260L telescopes are collimated properly at Vixen‘s factory before shipment. The telescopes hold the
collimation unless they are handled roughly. You can re-collimate your telescope using the following procedure if
necessary.
Turn the collimation screw clockwise or counterclockwise
gradually until the blurred star image and silhouette of the
secondary mirror are aligned concentrically in the center
of the telescope‘s field of view.
Use an eyepiece with high magnification and repeat the
above procedures so that you can make more precise
re-collimation of the optical axis.
When re-collimation of the telescope is done properly,
you perform a star test
with a medium to high
power eyepiece selecting a
star of the second or third
magnitude.
Right after you focus on the
star precisely, defocus the
star image slightly to look at
a diffraction pattern of the
star.
if the concentric diffraction
rings can be seen, the
optical axis have been
re-collimated properly.
Spider
Collimation
Allen Screws
Secondary
Mirror Holder
Misaligned largely
Out of collimation slightly
Collimated properly
Silhouette Silhouette
- Do not leave the product inside a car in bright sunshine or in other hot
places. Keep away strong heat at sources away from the product.
- When cleaning, do not use solvents such as paint thinner or similar
products.
- Avoid touching any lens or mirror surfaces directly with your hands.
In case a lens or mirror becomes dirty with fingerprints or general
smears, gently wipe it using a commercially available lens ceaner and
a lens cleaning paper or cloth, or consult you local Vixen dealer.
- Blow off dust on lenses using a commercially available blower brush.
- For storage, keep the product in a dry place and do not expose to
direct sunlight.
Model VMC260L Optical Tube Assembly
Optical Design Precision Spherical Mirror & Meniscus Lens System
Effective Aperture 260mm
Focal Length 3000mm
Focal Ratio 1 : 11.5
Light Gathering Power 1380X
Resolving Power 0.45 arc seconds
Limiting Magnitude 13.8
Threads 60mm, 42mm for T-Ring
Visual Back 50.8mm (2.0“), 31.7mm (1.25“)
Optical Tube Length 650mm
Outer Diameter 304mm
Weight 10.9 Kgs (24 lbs)
7X50 Finder Scope
(6.8 degrees field of view) Supplied
Flip Mirror Diagonal Supplied
Mounting System Dovetail Slide Rail and Mounting Platform
Carry Handle Supplied
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vixen VMC260L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vixen VMC260L in the language / languages: English as an attachment in your email.

The manual is 2.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vixen VMC260L

Vixen VMC260L User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info